# Raspberry Pi 3B+ SD card not mounting **URL:** \ **Category:** VxWorks SDK\ **Created:** [February 6, 2024, 10:58pm UTC](https://forums.windriver.com/t/raspberry-pi-3b-sd-card-not-mounting/294 "2024-02-06T22:58:01Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![johnson502](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@johnson502](https://forums.windriver.com/u/johnson502)\ **Post date:** [February 6, 2024, 10:58pm UTC](https://forums.windriver.com/t/raspberry-pi-3b-sd-card-not-mounting/294/1 "2024-02-06T22:58:01Z")
I have been trying to create a vxworks target on a raspberry pi 3b+ from this [guide] [https://labs.windriver.com/downloads/wrsdk-vxworks7-docs/2103/README\_raspberrypi3b.html](https://labs.windriver.com/downloads/wrsdk-vxworks7-docs/2103/README_raspberrypi3b.html)), but I can’t get into any of the files on the sd card. When I try to, it gives a “cd: error = 0x2.” which I think just means “not found”. When I run the devs command, sd0a doesn’t show up. Any ideas? Thanks U-Boot 2023.10-01124-g9a3a58396b (Nov 07 2023 - 14:46:24 -0800) DRAM: 948 MiB RPI 3 Model B+ (0xa020d3) Core: 67 devices, 14 uclasses, devicetree: embed MMC: mmc@7e202000: 0, mmc@7e300000: 1 Loading Environment from FAT… OK In: serial,usbkbd Out: serial,vidconsole Err: serial,vidconsole Net: No ethernet found. starting USB… Bus usb@7e980000: USB DWC2 scanning bus usb@7e980000 for devices… 4 USB Device(s) found scanning usb for storage devices… 0 Storage Device(s) found Hit any key to stop autoboot: 0 9157968 bytes read in 383 ms (22.8 MiB/s) ## Booting kernel from Legacy Image at 08000000 … Image Name: vxworks Image Type: AArch64 VxWorks Kernel Image (uncompressed) Data Size: 9157904 Bytes = 8.7 MiB Load Address: 00100000 Entry Point: 00100000 Verifying Checksum … OK Working FDT set to 0 Loading Kernel Image !!! WARNING !!! Using legacy DTB ## Starting vxWorks at 0x00100000, device tree at 0x00000000 … Instantiatm0 as rawFs, devx1 Formatting /ram0 for HRFS v1.2 Instantiating /ram0 as rawFs, device = 0x1 Formatting…OK. Targe vxTargetantiating /tmp as device = 0x10001 Formatting /tmp for HRFS v1.2 Instantiating /tmp as rawFs, device = 0x10001 Formatting…OK. * * * .…\ /…/ .…\ /…/ .…\ /…/ .…\ /…/ .…\ .…/ .…\ .…/ VxWorks SMP 64-bit .…\ .../ .…\ ./ Release version: 21.03 .…\ - Build date: Apr 20 2021 16:34:43 .… .…/ Copyright Wind River Systems, Inc. .…/ - 1984-2021 .../ /. ./ /… - – ``` Board: Raspberry Pi 3 Model B+ - ARMv8 CPU Count: 4 OS Memory Size: ~883MB ED&R Policy Mode: Deployed Debug Agent: Started (always) Stop Mode Agent: Not started BSP Status: ***UNSUPPORTED*** ``` usrNetDevNameGet: no network device usrNetDevNameGet: no network device Thu Jan 1 00:00:01 1970: ipcom\_drv\_eth[1e6170]: Error: ipcom\_drv\_eth\_bind\_to\_devs :: failed to get name of boot device Adding 14452 symbols for standalone. → Thu Jan 105 1970: ipnet[196b70]: Error: ipcom\_getsockaddrbyaddr failed gw: dhcp Attached TCP/IP interface to usb2End unit 0 Connecting to the Network… cmd [vxWorks \*]# cd /etc cd: error = 0x2. [vxWorks \*]# devs drv refs name 1 [3] / 2 [3] /bin ==\> /sd0a/sysroot/bin 2 [3] /boot ==\> /sd0a/sysroot/boot 2 [3] /dev ==\> / 2 [3] /etc ==\> /sd0a/sysroot/etc 12 [3] /fifos 17 [3] /host.host 15 [3] /input/event 2 [3] /lib ==\> /sd0a/sysroot/lib 0 [3] /null 11 [3] /ram0 14 [3] /random 4 [3] /shm 11 [3] /tmp 3 [3] /ttyS0 14 [3] /urandom 2 [3] /usr ==\> /sd0a/sysroot/usr 13 [3] /zero [vxWorks \*]# ---
**Author:** ![dan.milea](https://avatars.discourse-cdn.com/v4/letter/d/4bbf92/32.png) [@dan.milea](https://forums.windriver.com/u/dan.milea)\ **Post date:** [February 7, 2024, 6:30am UTC](https://forums.windriver.com/t/raspberry-pi-3b-sd-card-not-mounting/294/2 "2024-02-07T06:30:44Z")
The Raspberry Pi 3 VxWorks BSP does not have SD card support. The /bin, /boot, etc, entries in the output of the devs command are symbolic links, so they are not a reference that sd0a is available. For application development, follow the instructions to create a network device in the " Running applications" section of the README file you mentioned. Dan ---
**Author:** ![johnson502](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@johnson502](https://forums.windriver.com/u/johnson502)\ **Post date:** [February 7, 2024, 5:38pm UTC](https://forums.windriver.com/t/raspberry-pi-3b-sd-card-not-mounting/294/3 "2024-02-07T17:38:18Z")
I guess that makes sense. Why does the guide say to copy all of the sysroot/ stuff over then? seems kinda pointless.